High-Performance Brake Fluid DOT 5.1
High boiling point, low viscosity, excellent insulation | Specifically for new-energy vehicle braking Low viscosity ensures rapid response, maintaining sensitivity and stability even in extreme cold. An advanced hydrolysis-resistant formulation effectively slows degradation, safeguarding braking safety.
Category:
Specialized oil for new energy vehicles
Auxiliary oil
Dedicated oil for new energy vehicles
Product Specifications:
500ML
Viscosity grade:
24-hour Hotline:
4006 939 808
Product Details
Performance Features:
High-boiling-point anti‑vapor lock: Resists boiling even with frequent braking, providing greater peace of mind on long downhill grades.
Strong stability, rapid response: Still smooth at -40°C, with more precise ABS/ESP electronic control and enhanced hydrolysis resistance.
Water resistance: stable boiling point under wet conditions, resistant to degradation, and longer service life;
Boric ester formulation: High-purity polyether and boric ester base fluid, combined with an antioxidant and anti-corrosion system, offering excellent high-temperature stability and extended service life.
Technical Specifications:
Dry equilibrium boiling point: >265°C (high boiling point, no vapor lock under extreme operating conditions)
Wet equilibrium boiling point: ≥180°C (after moisture absorption, the boiling point decreases slowly, thereby delaying the degradation of brake fluid performance)
Low-temperature kinematic viscosity: ≤750 mm²/s at −40°C (faster brake response)
Fully compatible: Supports fuel‑powered, hybrid, and new‑energy vehicles equipped with braking systems such as ABS, ESP, DSC, and EBD.
Compatibility: Backward compatible with DOT 4, DOT 3, HZY 5, and HZY 4 brake fluids.
Replacement interval: 2 years or 40,000 km, whichever comes first.
Applicable Standard: GB12981-2012 HZY6
Shelf life: 4 years
Warning:
Brake fluid can corrode painted surfaces; if it is accidentally splashed, rinse immediately with water.
Protect against contact with skin and eyes; if contact occurs, rinse immediately with plenty of water and seek medical attention.
Store only in the original sealed container to prevent moisture absorption. Use promptly after opening.
Please dispose of used brake fluid in accordance with environmental regulations and deliver it to a designated recycling facility for proper treatment.
Previous page
Next page
Related products
Coolant transmission fluid specially formulated for new-energy three-electric systems
High‑efficiency thermal conductivity | Electrical insulation | Full‑temperature protection | Corrosion and scale prevention | Long‑term stability This product is an insulating cooling and transmission fluid specially formulated for new‑energy vehicles. It features a high‑performance formulation developed specifically for the three‑electric system of pure electric and hybrid models. Combining superior thermal conductivity, electrical insulation, all‑temperature protection, corrosion and scale inhibition, and long‑term stability, it differs from conventional antifreeze and is engineered to meet the demanding operating conditions of high‑voltage, high‑speed, and high‑precision electric drive systems in new‑energy vehicles. It is a critical functional fluid that ensures safe, efficient, and long‑lasting vehicle performance.
Oil for oil-cooled gear reducers
Fully synthetic imported base oil Suitable for electric‑powered new‑energy vehicles
Dedicated engine oil for new-energy hybrid vehicles
A fully synthetic, next‑generation engine oil specially formulated for hybrid vehicles, compliant with China VI‑B emission standards and suitable for all HEV, PHEV, and range‑extended hybrid models. It meets the low‑ash requirements of GPF particulate filters and provides tailored protection against the frequent stop‑start cycles, low‑temperature emulsification, and rapid mode transitions typical of hybrid engines, while delivering exceptional wear resistance, fuel efficiency, and long‑lasting performance.
S9 – Fully Synthetic Engine Oil for Gasoline and Hybrid Vehicles
A specialized lubricant for hybrid vehicles, formulated with a fully synthetic polyalphaolefin (PAO) base oil and refined with imported composite additives. It is meticulously engineered using anti-wear agents and advanced detergency‑dispersion technologies. Designed specifically for hybrid vehicles, which frequently alternate between fuel‑powered and electric‑driven operation and experience rapid fluctuations in oil temperature, this product meets the unique demands of such powertrains.
Wells' classroom
Consultation
If you are interested in our products, please leave your email address to receive a free quotation. Thank you!
